Tube Tech SMC 2B Multiband Opto Compressor - Manual (Page 6)

Lydkraft ApS
Mose Allé 20, DK2610 Rødovre
Denmark
6
5) The difference between channels shall be within 0,5dB
6) Repeat step 2-5 for the two other bands
OUTPUT GAIN potentiometer:
1) Turn the OUTPUT GAIN on max. gain (clockwise) and check that the difference
between the two channels, are less than 0,1dB.
2)
Set the gain pot to “0” dB.
3) The potmeter in the channel with the lowest level is adjusted to match the other
channel, by changing the resistor, until the level is within 0,1dB.
The resistance range is normally within 274K

to 510K

4) The difference between channels shall be within 0,5dB
(010502)