Asking questions from a flow lesson – Turning Technologies Flow User Manual
Page 32
Flow for PC, Mac and Linux
32
3
Open PowerPoint.
4
Start the Slide Show.
5
Click the start question icon
when it appears on the slide.
NOTE
The polling question will automatically begin if Automatically start question is selected within the
Flow PowerPoint add-in.
6
The percentage of submitted answers appears in the Flow Main Window.
7
Click End Question after all participants have answered.
NOTE
The polling question will automatically end if Finish current question when time is up is selected
within the Flow PowerPoint add-in.
The Question statistics chart is displayed if Show results when polling closes is selected in Options > Settings > Flow
settings. The Question statistics chart will not appear if Advance slide when question ends is selected within the Flow
PowerPoint add-in.
8
Advance to the next question in the Slide Show.
9
Repeat steps 5 - 8 as necessary.
Asking Questions from a Flow Lesson
Follow the steps below to poll questions from a Flow lesson.
1
Open Flow.
2
Click the Options
icon and select Load lesson.
3
Browse to the saved lesson and click Open.
4
Register participants.
5
Click Engage lesson.
6
Click End polling after all participants have finished the test.
turningtechnologies.com/user-guides