Turning Technologies RemotePoll - Manual (Page 6)

RemotePoll 6
NOTE
The custom Session ID is released upon disconnection.
9 Click Login.
10 If connecting for the first time, the Privacy Terms and Terms of
Use Agreement window appears. Accept or Decline the terms.
The ResponseWare Session ID window opens.
11 Click Close.
Next Steps
Provide the Session ID to your remote locations.
Setting Up a Direct IP Connection in TurningPoint
Cloud or TurningPoint 5
1 Open Turningpoint Cloud or TurningPoint 5.
2 Click the Preferences icon on the bottom right corner of the Dashboard.
3 Select Connections from the left menu.
4 Scroll to the RemotePoll preferences and check Enable RemotePoll Support.
The computer’s IP Address is displayed in the Current IP Address field.
5 Enter a port number for the RemotePoll Port. The default port is 1025.
6 Click Close.
Configuring TurningPoint 2008
This section covers the following:
Setting Up a ResponseWare Connection in TurningPoint 2008
Setting Up a Direct IP Connection in TurningPoint 2008
Setting Up a ResponseWare Connection in TurningPoint 2008
RemotePoll can use the ResponseWare web connection to communicate all responses received from the remote location to
the presenter.
turningtechnologies.com/user-guides