Turning Technologies CPS - Manual (Page 22)

CPS for Mac 22
Associating Dynamic Standards to Questions
The Dynamic Standards feature allows you to align state standards to questions during a session. This feature allows you to
choose a subset or list of standards to apply to the lesson you are engaging.
You can choose to be prompted with this subset before you ask each question, or you can automatically apply all the standards
in your subset to all of the questions in the lesson you are engaging.
1 Click Lessons.
2 Click the lesson to engage.
3 Click the Engage icon.
The CPS - Session Setup window appears.
4 Click the Dynamic Standards icon.
NOTE
The Dynamic Standards icon is only available in the Teacher Managed Assessment mode.
The CPS - Dynamic Standards Setup window appears.
5 Select the standard(s) to be included in your subset.
6 Below When a Question is Engaged, select one of the following options:
l
If Prompt for Dynamic Standards is selected, the Dynamic Standards Setup window appears with every
question you engage. This allows you to decide during the delivery of each question and which standard(s) to
apply.
TIP
This option is useful with the Verbal Question feature.
l
If Automatically Align Selected Dynamic Standards is selected, CPS automatically aligns the standard(s)
defined in the subset with each question in the session. CPS will not prompt you with the Dynamic Standards
Setup window.
l
If None is selected, CPS will not prompt you with the Dynamic Standards Setup window and no standards will
be applied to the questions in the session. However, a subset of standards can be selected and applied to
questions at any time by clicking the Dynamic Standards icon from the Question Deliver window.
7 Click Apply to apply the standards and settings and return to the CPS - Session Setup window.
8 Click Start to start the lesson.
Copying Questions Within a Standard
Copy and edit questions within the same standard.
1 Click Standards.
2 From the Standards side, select the standard containing the question to copy.
3 Click the question to copy.
TIP
To select multiple questions, press and hold the Command key while clicking each question.
4 From the top toolbar, click Question and select Duplicate.
The copied question(s) appear below the original questions.
turningtechnologies.com/user-guides