Turning Technologies DualBoard - Manual (Page 10)

DualBoard 10
Mounting the DualBoard
WARNING
It is recommended that a skilled professional assess the strength of
the wall and determine the appropriate hardware required to securely
attach the DualBoard to the wall. A minimum of two people are
required to safely lift and mount the whiteboard to the wall.
Prerequisites
If you are using a ceiling mount projector, ensure that the DualBoard is aligned with
the projector image prior to mounting the board.
NOTE
Due to the sizable number of wall types, hardware for the wall hanger
and mounting clips is not included.
1 Attach the wall hanger to the wall.
2 Hang the DualBoard on the wall hanger.
3 Hook the mounting clips over the back lip of the DualBoard frame, positioning one mounting clip in each
corner at the bottom of the board.
4 On the wall, mark the location of the mounting clip holes.
5 Install suitable wall anchors into the wall.
6 Install screws to secure the mounting clips to the wall. Use two screws per mounting clip. The recommended screw
size is number 8 or M4.
turningtechnologies.com/user-guides