Turning Technologies Mobi - Manual (Page 7)

MobiView 7
1 Turn on the computer on which WorkSpace or Flow is installed.
2 Insert the MultiHub into a working USB port on the computer.
3 Turn on the MobiView by pressing the blue Power button on top of the unit.
The message Attempting to Connect is displayed on the MobiView screen.
4 When the message, Unable to connect… is displayed, press the blue pairing button on the MultiHub.
5 While the blue pairing button is flashing, tap Continue on the MobiView screen.
Calibrating the MobiView Touchscreen
The MobiView touchscreen occasionally requires calibration. Calibrating ensures that the MobiView recognizes digital pen
taps in the same place that you are actually tapping, writing or drawing on the touchscreen.
1 From the MobiView Home Screen, tap Settings.
2 Tap Calibrate Touchscreen.
3 Per the on-screen instructions, tap each dot as it appears on the screen.
NOTE
Use the digital pen for better accuracy during the calibration process.
4 Tap Continue.
Changing the Language on the MobiView
The language can be changed on the MobiView.
1 From the MobiView Home Screen, tap Settings.
2 Tap Select Language.
3 Tap the preferred MobiView language (and connected clickers).
Adjusting the Brightness on the MobiView
You can change the brightness of the MobiView touch screen. The amount of brightness will affect battery life; brighter screens
use more battery. The MobiView touch screen dims after a set amount of time to maximize battery life. You can adjust both the
default screen brightness and the amount of time the screen can sit without being used before it enters sleep mode.
1 From the MobiView Home Screen, tap Settings.
2 Use the digital pen to tap and hold the vertical line in the Brightness slider.
3 With the digital pen tip on the vertical line, slide the vertical line:
l
Slide to the right to brighten the screen.
l
Slide to the left to darken the screen.
Remove the digital pen tip from the slider.
4 Optionally, in the Sleep Timer section:
l
Tap Plus to add more time before the screen enters sleep mode.
l
Tap Minus to subtract time before the screen enters sleep mode.
turningtechnologies.com/user-guides