Turning Technologies TurningKey - Manual (Page 19)

TurningKey User Guide 19
Loading a Participant List
6 Click Finish.
The Participant List Editor window displays.
7 Double-click on a field and type in the participant information.
8 Double-click on the next field and type in the participant information.
9 Repeat steps 7 and 8 until all participant information has been entered.
10 Click Done.
The participant list information is automatically saved.
Loading a Participant List
A participant list must be loaded prior to starting the session in order for participant information and
results data to be tracked.
How to load a participant list...
1 Click Participant List on the TurningKey menu bar.
• You can also select a recently used participant list from the bottom of the Participants List menu.
Note
A Device ID column is automatically placed as the
first column in the participant list. This field can be
left blank and the participant will be matched to
the user ID entered in the ResponseCard.
Auto Select Auto if you want to collect Device IDs or user information from the
ResponseCard XR or ResponseCard NXT to build a real-time participant list.
Choose Other... Select Choose Other... if you want to select a saved participant list to be
used with the session.
Tip
A participant list can also be loaded from the
Participant List drop-down menu on the main
application window.