Turning Technologies Response - Manual (Page 14)

______________________________________________________________ Response User’s Guide
14 | P a g e
Normal Configuration
As mentioned above, the PRS RF Student Response Pads are configured as normal by default.
You will configure Student Response Pads as Normal in case you need to delete student IDs
from previously used Student Response Pads or change back to default from another
configuration such as Loaner.
1. Select Setup My Hardware from the main
screen.
2. Right-click the Response Receiver icon, and
select Properties.
3. Click on the Configure Clickers tab.
4. Choose Normal from the Clicker Type drop
down menu.
5. Click on the Setup button to display the
Feedback instructions.
6. Turn on your Student Response Pad.
7. Input the number or letter (the channel) that appears at the end of the line in
angled brackets. Ex: <3> The channel may vary on each setup.
8. Once you see Normal on the 2 nd line, press the arrow key to join.
When seeing Join ID followed by a number this means that you have successfully configured
your Student Response Pad.
Loaner Configuration
If you are configuring your Student Response Pads
as Loaner, you are facing one of the following two
scenarios:
You own a set of Student Response Pads that will
be used by multiple sets of students, and you want
the students to be able to use whatever Student
Response Pad they pick up at the beginning of
class.
All students in your class(es) have purchased a
Student Response Pad, and you want a few spares
in case they forget to bring their Student Response
Pads.