Turning Technologies Response - Manual (Page 17)

______________________________________________________________ Response User’s Guide
17 | P a g e
Test System
The Test System option tests both your receiver and
Student Response Pads. It determines whether the
receiver is installed properly and can successfully
receive responses.
1. Select Setup My Hardware from the
main screen. The eInstruction Device
Manager window opens.
2. Right-click the Receiver icon, then select
Properties.
3. Click the Test tab.
4. Click on the Start Receiver button.
Response starts the receiver and displays a channel number.
Test the Student Response Pads
1. Power on the Student Response Pads (Cricket, PRS RF and/or CPS Pulse) you want
to test.
Refer to the numbered pair at the top of the window, such as <A, 41>, when using
a PRS RF/ Cricket mixed environment system. The PRS RF uses the first single digit
to connect. The Cricket uses the second, 2 digit number to connect. When using
Pulse Student Response Pads use the number after the following display: CPS RF
Pulse <44>. If using all three classroom solutions mentioned the display would look
like: Mrs. Smith’s 1 st Grade Class <C, 45> CPS RF Pulse <44>.
2. When a signal is received from a Student Response Pad, the Student Response Pad
and its identifying information will be listed in the window.