Two Notes VM-202 - Manual (Page 12)

Quick start
2. place the microphone in the virtual studio (Miking section),
3. shape the signal (Post FX section).
With each step, Two Notes Audio Engineering implements its know-how to propose the most advanced
simulations on the market and ensure a total realism both for the musician (playing sensations) and the
listener (sound quality).
2
3
4
6
5
1
Big Preamp
1
0
Analog Line Device
1
0
Digital SPDIF/AES/EBU
Device
1
0
Multi FX
1
0
Figure 2.1: Wiring the VM-202
1 TORPEDO VM-202 3 Synth, electric piano 5 Digital multi-FX
2 Guitar or bass preamplifier 4 Analog line device 6 Digital S/PDIF/AES/EBU device
2.1 Two simultaneous channels !
The VM-202 receives two input channels (1 and 2) and send two output channels (L and R). Two Notes
proposes different routing modes to allow the unit to interface with other stereo, mono or dual-mono
products (two independent channels).
With the VM-202, you have two simultaneous A and B channels, linked or independent. As in a pro-
fessional studio, you can route these two channels to make a mix of two different systems (tube output,
microphone, speaker cabinet), two different instruments miking (a guitar and a bass preamplifier) or a
multi-microphones miking process.
12 Two Notes Audio Engineering Torpedo VM-202