Two Notes Live - Manual (Page 25)

Configuring and using the TORPEDO Live
6 SETUP mode
Bouton Fonction
SETUP Return to PERFORM mode
PRESET/PARAMETER Navigate the parameters
OUT LEVEL/VALUE Set a parameter value
HOLD TO SAVE/EDIT (hold) Save a preset between 01 and 00 (preset 100)
HOLD TO SAVE/EDIT (toggle) Switch to EDIT mode
Whether you are in EDIT or PERFORM mode, click on the SETUP button to enter the SETUP mode. The SETUP
mode groups all the global parameters of the TORPEDO Live. In this mode, you will gain access to some infor-
mation, such as the reception of a MIDI command or the syncing of the machine with the TORPEDO Remote.
Parameter Value
MIDI CC Control Change receive, On or Off
MIDI PC Program Change receive, On or Off
MIDI CHANNEL
MIDI Channel selection, from 1 to 16 or ALL (the machine listens to all MIDI chan-
nels)
MIDI MONITOR Incoming MIDI command monitoring
• "- -": a command is received on a MIDI channel different from the one
you selected for the machine.
• "In": a command is received on the channel you selected for the ma-
chine.
REMOTE MONITOR
• No Connection: no active USB connection
• USB Connected: active USB connection
• Remote connected: active USB connection, sync with the TORPEDO re-
mote
SPDIF Freq Selection of the S/PDIF output frequency (48KHz or 96KHz)
Firmware Current firmware version of the TORPEDO Live
Serial Serial number
Two Notes Audio Engineering TORPEDO Live 25