UVP 81-0267-01 Doc-ItLS and VisionWorksLS Software - Manual (Page 7)

UVP L IFE S CIENCE S OFTWARE
4. If darkroom lighting is manually
controlled, turn on the white light Epi
Illumination switch. If darkroom
lighting is software controlled, turn on
the white light Epi Illumination
through the Lighting Menu.
Lighting and Filter Adjustment
in the Lighting Menu
5. If using a manual lens, adjust the
zoom, aperture and/or focus on the
lens at the top of the imaging system.
If the lens is motorized (software
controlled), use the slider bars in the
Lighting Menu to adjust the zoom,
aperture and/or focus. After adjusting
the aperture, it may be necessary to
readjust the exposure time (see Step
3, above).
Lens Control Adjustment
In the Lighting Menu
Note: If using a BioSpectrum system with an automated lift, adjust the height of the
automated lift platform to increase or decrease the distance from the sample to the
camera. To adjust the Tray Height, move the height slider bar in the Lighting Menu.
After adjusting the tray height, it may be necessary to readjust the focus and/or zoom
settings.
6. When the image is positioned and ready for capture, click on the Capture button in the
Acquisition Action Tab.
Note: There are numerous additional techniques for improving the quality of the captured
image. See the Help Files in the software for additional instructions on the use and
function of these features.
- 7 -
81-0266-01 Rev G
81-0267-01 Rev G