VAC Statement 450 Monoblock - Manual (Page 8)

7
INSTALLING THE FRONT GLASS AND TOP RAILS
Your amplifier has been shipped with the front glass and the top rails removed.
The following steps show how these are installed.
Lay the provided microfiber cloth on top of the fascia as shown.
Set the glass in place. Steady it with your hand; do not let go.
Insert one of the provided screw/cone washer assemblies into one of the
top holes in the glass. Start the screw, taking care that the threads align
properly. Tighten as much as you can using only your fingers.
Insert and tighten the remaining three screw/cone washer assemblies.
Using the provided Allen driver, tighten the four screws to a gentle but firm
pressure
Pull the microfiber cloth free, starting at one side as shown