Vermona Filter Lancet - analogue multimode filter - Manual (Page 12)

Amplifier (VCA)
A voltage-controlled-amplifier (VCA) controls FILTER Lancet’s output. It
offers the following control elements:
Picture 4: Amplifier (VCA)
LFO INT
This control sets the LFO's modulation intensity towards the output
volume. The result is a tremolo-effect.
MODE
This switch sets the modulation source for the VCA, respectively sets the
VCA to be opened permanently. There are three positions:
EG Envelope Generator - see "Envelope-Generator (EG)", page 14
ON the VCA is permanently on
EF Envelope Follower, a control signal deriving from the level at the
input
Owner's Manual VERMONA Filter Lancet
- 12 -