Vermona Filter Lancet - analogue multimode filter - Manual (Page 5)

Getting Started
To ensure top quality we carefully checked FILTER Lancet before packaging.
Nevertheless, the unit could have been damaged during transportation.
Therefore, we ask you to take a serious look at the unit when unpacking it.
Do not hesitate to contact us, should there be anything unusual on MONO
Lancet itself or its packaging.
You should find the following items in the box:
• one Filter Lancet unit
• one AC adapter (12V / at least 830mA)
• this manual
Connections and Powering
If you came here without any problems, you can finally start up your FILTER
Lancet:
1. Connect the provided power supply unit to the 12VAC jack on FILTER
Lancet
ATTENTION:
Only use the included power supply! You may already
own a suitable-looking power supply that offers the same
connector. However, FILTER Lancet requires an AC adap-
ter, not DC! Using an unsuitable power supply may cause
damage to the unit.
2. Connect the INPUT jack of FILTER Lancet to an appropriate audio
source such as a drum-computer, a groove-box, a synthesizer, a gui-
tar or CD-player.
3. Connect the OUTPUT jack of FILTER Lancet to an appropriate audio
input of a mixing console, an audio-interface or an amplifier.
4. Start FILTER Lancet by switching on OVERKILL on the unit’s rear. The
corresponding green LED will be lit.
5. Congratulations, FILTER Lancet has been started.
Owner's Manual VERMONA Filter Lancet
- 5 -