Voodoo Lab Ground Link - Manual (Page 3)

2
D I G I T A L M U S I C C O R P O R A T I O N
1. Introduction
______________________________________________________
1.1 Overview
The Ground Link provides direct on/off control of the eight audio loops in the
GCX Guitar Audio Switcher. Also, if used in conjunction with Ground
Control Version 2.00 or higher, each button can be assigned to any loop of up
to four GCXs, any MIDI controllers, or Sequencer Start/Stop.
The Ground Link can be used with Ground Control, other MIDI controllers, or
as a stand-alone controller for the GCX. The Ground Link can store 128
combinations of GCX loop settings for recall by any MIDI controller.
The Ground Link is powered by the GCX using a standard 5-pin MIDI cable.
1.2 Top Panel
• Foot Buttons - control GCX loops or user-defined functions.
• Status LEDs - show current status of each button function.
1.3 Rear Panel
• MIDI IN* - receives MIDI data from the Ground Control or other MIDI
controller.
• GCX OUT - sends MIDI data to the GCX, and echoes data from the MIDI
IN.
• STORE - stores combinations of GCX loop settings.