Voodoo Lab Ground Link - Manual (Page 6)

5
D I G I T A L M U S I C C O R P O R A T I O N
Control preset, the GCX will change to the loop settings defined in the preset.
The Ground Link LEDs will show the present loop status.
2.2 Advanced Setup
Note: The following advanced setup options require Ground Control version
2.00 or higher. If your Ground Control has version 1.00, contact the factory
for update information.
You can use Ground Control to redefine the functions of the Ground Link
buttons. Each Ground Link button can be used to control either:
• one loop on any of four GCXs
• any ON/OFF MIDI Controller
• Sequencer start/stop
Please refer to the Ground Control manual (or addendum) for instructions on
redefining Ground Link button functions.