Wharfedale Pro PMX 710 - Manual (Page 12)

OPERATING MANUAL AND USER GUIDE
0
. Speakon™ outputs - For connection to your loudspeakers
2. Power Switch - Turns the unit on or off, ensure that AC
is supplied and that the levels have been turned down to
protect your speakers
3. Phantom Power switch - Activates the +48v phantom
powering for the 4 XLR inputs
4. IEC receptacle - Allows input of the supplied IEC lead for
AC supply
PMX 700 / PMX 710 REAR PANEL
PMX 700 / PMX 710 MASTER SECTION
. FX Select - Selects the effect type that will
be used
2. Power LED - Indicates AC supply
3. Phantom Power LED - Indicates +48v
phantom powering is supplied to all of
the XLR inputs. Please check that all
connected microphones can withstand
+48v power input
4. FX Send - Allows for master adjustment of
the FX send buss
5. FX to Mon - Routes the FX processor
output to the Monitor send
6. Master Level LED’s - 4 segment LED
metering for the master buss, if the limit
LED illuminates constantly lower the
master level to avoid damage to your
loudspeakers
7. Bypass - Used to switch the internal FX
processor on or off

2
3
4
5
6
7
0
9
8

2 3
4
8. FX to Mix - Controls the output level of the internal FX processor to the master buss
9. Amp Mode - Configures the signal routing of the graphic EQ. With Mode ‘A’ each EQ controls
each respective output with the monitor sends routed unprocessed to the Mon output. In Mode
‘B’ The Mon is processed by the top EQ and the lower EQ controls will process both left and right
output channels.
10. 7-band EQ - 2 independent 7-band equalisers with flexible A/B routing
. Rec Out - Line level output using phono connectors, provides connection to recording devices
2. Mix Left - Balanced / unbalanced ¼” TRS master output for the left channel
3. Mix Right - Balanced / unbalanced ¼” TRS master output for the right channel
4. Mon - Balanced / unbalanced ¼” TRS Monitor send output

2
3
4