Wyred 4 Sound mINT - Manual (Page 10)

pg. 8
9. Follow all prompts with-in the setup to continue the procedure. (Click “Next”
two times) If you are asked to continue with non-Windows “signed” driver,
please click continue installation.
10. Once the installation has finished, you will be see a window called
“RegSvr32”, please click “Ok”. The installation has completed and the driver is
ready to use. It will be necessary to restart the computer for proper
operation.
11. Connect a USB cable from the mINT to the computer ( type: USB A to USB B )
with the mINT and computer powered on.
12. It is now necessary to select the “24/96 Async USB Audio Sound” interface as
the default output device for your system. This option will be located in the
“Control Panel” for your OS. After selecting the mINT as the output device it
may be necessary to select the device in you preferred media player. Please
refer to http://www.wyred4sound.com/faq.html for a detailed J. River setup
guide.
13. The last step is easy……Enjoy your music!
Back Panel Diagram
1. Aux 1: Input for analog source.
2. Aux 2: Input for analog source or Home Theater bypass when
switch “#6” is set to the in position.
3. Toslink: Optical input for a digital source such as a TV, DVD player,
Sonos, Airport express, CD player, etc.
4. Asynchronous USB: USB input for streaming music from a Mac or
PC computer.
5. Coaxial: Input for a digital source such as a TV, DVD player, Sonos,
Airport express, CD player, etc.
6. Pre-out or HT bypass selector switch.
7. Analog pre-out for connecting to a subwoofer, additional amp. etc.
8. Analog “Fixed out” or “Main In” selected by switch “#9”.
9. “Fixed Out” or “Main In” selector switch.
10. Right speaker outputs.
11. Left speaker outputs.
12. 12V DC Trigger: Used for turning the unit on from a standby state
as well as powering on equipment with a compatible trigger input.
(20mA max output)
13. Main On/Off power switch.
14. Fuse holder and AC power inlet.