Pg. 7 – Wyred 4 Sound mINT User Manual
Page 9
pg. 7
2. The USB device should automatically start installing.
3. It is now necessary to select the mINT as the output device. Please locate the
Audio Midi setup by following this directory: Go to Finder----> Applications--->
Utilities----> Audio Midi setup. Once you have reached the Midi setup you will
need to select the “24/96 Async USB Audio Sound” as the default output
device and apply the setting. This can be done by clicking on the device listed
above, followed by clicking the “gear” icon located at the bottom of the
window. When you click the gear it will show a pop up window where “set
default output device” can be selected.
4. Now you can open your preferred music playback program and find the
preferences or options tab. Once you locate the output device, make sure the
“24/96 Async USB Audio Sound” audio interface is selected. It is not necessary
to select the mINT as the output device in programs such as iTunes, Amarra or
BitPerfect.
5. The last step is easy……Enjoy your music!
USB Configuration (PC)
You must first download the drivers which are required for asynchronous
operation. They are available for download on the Wyred 4 Sound website
. The drivers can be emailed to you
if necessary, request them by emailing
. Please follow
these steps to install the driver. Keep in mind that you can always ask for help if the
following steps don’t seem to apply to your system.
1. Navigate to the Wyred 4 Sound website downloads page.
2. Locate the file titled “24/96 Asynchronous driver package” and click
“download”.
3. Next click “Save” and be sure to note or specify the folder on your computer
where the file will save to.
4. When the download is complete click “open”
5. Now double click the file titled “W4S2496AsynUsbAudioSetup”
6. Click “Setup Software” in the window that pops up.
7. Click “Next” to proceed with installation.
8. On the bottom of the new window, choose whether this should be installed
for “Everyone” or “Just me” and click “Next”. (Typically “Everyone” will be the
appropriate choice. If you have multiple user profiles on your computer and
would prefer the driver to only be available when you are logged in, select
“Just me”.)