XAIRCRAFT OSD - Manual (Page 2)

1 ©2013 XAircraft All Rights Reserved
Parameters
Input
Vol.
Video Input
Video
Output
Dimension Weight
4.8~6V 2 Chn. switchable Inputs 1Chn. 47.5mm x 26.9mm x 10.5mm
18g
(not including cables)
Preparation
When connecting XAircraft OSD to the module which does not belong to XAircraft, you need to weld related
links by yourself. The things you need to prepare: welding tools, camera equipment, video transmitter, power
supply equipment and 3.5mm 3Channel AV connector.
Wiring
B=Black, W=White.
Port Interface Type Description
AV IN1 3.5mm 3Channel AV Connector Connect to camera which has AV output.
AV IN2 XAircraft SuperX 5Pin Connector Connect to brushless gimbal or camera.
AV OUT XAircraft SuperX 5Pin Connector Video output, connect to video transmitter.
Warning: Keep the Red, Yellow and Green wires of 5PIN Cable DISCONNECTED.
AV IN2 AV OUT
Camera
GND B
AV W
GND B
AV W
3.5mm AV Connector
SuperX
IO Module