DYSON DC 01 - Manual (Page 2)

Wand & hose assembly
Push yellow hose cuff firmly over wand end with twisting motion.
1. Getting started
Cleaner head adjustment
Hold the cleaner head down with foot
and tilt machine back.
On/Off switch
Cord storage
Wrap cord around both cable winders.
Accessory tool location
All tools are stored neatly on the tool storage posts.
Cleaner head adjusts
automatically to
correct height.
Guide wand into hose, keeping it
straight.
Locate wand handle into socket from
above.
Push home until it ‘clicks’ into place.
Insert tool on to end of wand
as shown.
For cleaning awkward places
remove wand and insert tool
adaptor into end of hose.
Attach tool as
required.
Tool adaptor
1
1
2
4
3
4
5
5
Rotate top
quick-release
cable winder...
...to release cable.
P L E A S E R E A D A L L I N S T R U C T I O N S C A R E F U L LY
BEFORE USING YOUR DYSON VACUUM CLEANER.
Assemble the machine as follows:
2
click
Ensure hose does
not kink when
replacing wand
Tool adaptor