Ryobi FPR2000 - Manual (Page 7)

7 — English
PRODUCT SPECIFICATIONS
Tube length ......................................................................................................................................................................11 ft.
Rating .............................................................................................................................................. 120 V~, 0.5 Amps, 60 Hz
FEATURES
KNOW YOUR PAINT SYSTEM
See Figure 1, page 11.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
CUT-IN PAD - The cut-in pad provides an easy alternative to
painting in tight places such as window and door molding.
DUET™ POWER PAINT TOOL SYSTEM - Dual features
allow for two users to use the system together: one can use
the roller while the other uses the cut-in pad or second roller.
FORWARD/OFF/REVERSE SWITCH - With the switch set
on forward, paint is pulled from the can or bucket and flows
into the roller or cut-in pad for easy paint application. When
the switch is set on reverse, paint is pulled from the roller,
cut-in pad and puts it back in the can or cleaning bucket.
Setting the switch in the off position will stop the flow of paint.
HANDLE REST - A convenient resting place on the back of
the machine helps keep the work area clean while providing
a temporary resting place for painting accessories.
PAINT ROLLER - The paint roller accepts any 9 in. roller,
up to 3/4 in. nap.
VARIABLE PAINT FLOW DIAL - The variable paint flow dial
on the handles make paint flow control quick and easy.
TOOL STORAGE - When not in use, store handles and pads
in the slots at the rear of the machine.