Ryobi SDS60 - Manual (Page 9)

9
kNOW YOUR ROTARY HAMMER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
AUXILIARY HANDLE ASSEMBLY
Your rotary hammer is equipped with an auxiliary handle
assembly. For ease of operation, use the handle with either
the left or right hand.
BLOWS PER MINUTE
This tool features an impact speed of 0-4,000 BPM (Blows
Per Minute). Blows Per Minute is the number of impacts
per minute.
DEPTH STOP ROD
A depth stop rod has been supplied with this product to
assist in controlling the depth of drilled holes.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
Your rotary hammer has a direction of rotation (forward/
reverse) selector located above the switch trigger for
changing the direction of bit rotation.
kEYLESS CHUCk
The supplied keyless chuck allows you to hand-tighten or
release the bit in the chuck jaws.
LEVEL
A level is located on the top of the motor housing to help
you keep the bit level during use.
LIVE TOOL INDICATOR
The live tool indicator is located on the handle of the rotary
hammer and indicates that the tool is connected to a power
supply.
LOCk-ON BUTTON
The lock-on button is convenient for continuous use for
extended periods of time.
MODE SELECTOR
Select either hammer drilling mode, hammer mode, or drilling
mode depending on the type of application. The rotary
hammer can function as a hammer drill, standard drill, or
be used as a chisel in rotary hammer mode.
SDS CHUCk
The SDS chuck can accept either the supplied SDS bits, SDS
flat chisel bit, or can be used to hold the 1/ in. chuck.
VARIABLE SPEED TRIGGER AND DIAL
The variable speed dial enables the rotary hammer to operate
faster or slower depending on the selected speed.
FEATURES
ASSEMBLY
UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-55-579 for assistance.
PACkING LIST-DELETED CHISEL BIT CASE
Rotary hammer with Auxiliary Handle Assembly
1/ in. Keyless Chuck
SDS Drill Bits (3)
SDS Flat Chisel Bit
Case
Opera
tor’s Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed
this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.