Pilz PSSnet GW1 MOD-EtherCAT - Manual (Page 27)

Installation
Operating Manual PSSnet GW1 MOD-EtherCAT
1002692-EN-02
27
Install Gateway
Use the locking elements on the rear of the product to attach it to a mounting rail.
1. Guide the product straight on to the mounting rail, so that the locking elements click into
place.
2. Push the product back as far as it will go.
3. Make sure that the locking mechanisms click into position, connecting the product firmly
into the mounting rail.
[1]
[2]
Install Gateway on top hat rail
5.4