Nexen RSTC1100 964528 - Manual (Page 2)

FORM NO. L-21204-C-0908 2
In accordance with Nexen’s established policy of constant product improvement, the specifi cations contained in this
manual are subject to change without notice. Technical data listed in this manual are based on the latest information
available at the time of printing and are also subject to change without notice.
Technical Support: 800-843-7445
(651)
484-5900
www.nexengroup.com
Nexen
Group, Inc.
560 Oak Grove Parkway
Vadnais Heights, MN 55127
Copyright 2005 Nexen Group, Inc.
Read this manual carefully before installation and operation.
Follow Nexen’s instructions and integrate this unit into your system with care.
This unit should be installed, operated and maintained by qualifi ed personnel ONLY.
Improper installation can damage your system or cause injury or death.
Comply with all applicable codes.
DANGER
Manufacturers’ Declaration
In accordance with the CE machine directive 98/37/EC, Appendix II B
We hereby declare that the pneumatic/mechanical components described in this manual as well as their indi-
vidual components are intended, in the confi guration in which they have been supplied, to be integrated into
a machine.
They must not be put into service until the machinery into which it is to be incorporated has been declared in
conformity with the provisions of the Directive mentioned above or its amendments.
All Nexen products are designed in accordance with the manufacturing directives for pneumatic systems ac-
cording to EN 983.
ISO 9001 Certifi ed