Altera Arria GX - Manual (Page 23)

Altera Corporation Getting Started User Guide A–5
October 2007 Arria GX Development Kit
5. Click Options and set the option bit start address to 0x03FE0000
(
Figure A–3 ), then click OK. This address must match the option bit
address location specified in the PFL MegaWizard ® interface.
Figure A–3. Options Dialog Box
6. Under Input files to convert, click on the SOF Data cell, then click
Add File
. Browse to the directory Examples\MyFirstFPGA,
highlight the MyFirstFPGA.sof file, and click Open. This adds
MyFirstFPGA.sof
to the Input files to convert list ( Figure A–4 ).
Figure A–4. Setting Input Files to Convert
7. Confirm that the Convert Programming Files dialog box appears
with the selections shown in
Figure A–5 .