Altera Arria GX User Manual
Page 27
Advertising
Altera Corporation
Getting Started User Guide
A–9
October 2007
Arria GX Development Kit
11. Click on the EPM570 device to highlight it, then right-click it and
select Change File to select a file.
12. Find and select the pfl_3fe.pof file in the Programming Files
directory, and click Open. The pfl_3fe.pof file defines the PFL
design for the MAX II device, shown as EPM570F100 in
.
Figure A–8. Open the PFL Design File
13. If the CFI_512MB flash device is listed under the EPM570F100
device as shown in
, go to step
. Otherwise, highlight,
then right-click pfl_3fe.pof in the Programmer, then click the Attach
Flash Device
option.
14. Highlight and check CFI_512MB (
)
and click OK.
Advertising