Altera Arria V GX - Manual (Page 40)

6–18 Chapter 6: Board Test System
The Power Monitor
Arria V GX Starter Kit November 2014 Altera Corporation
User Guide
Figure 6–9 shows the Power Monitor.
The following sections describe the Power Monitor controls.
General Information
The General information controls display the following information about the
MAX V device:
■ MAX V version —Indicates the version of MAX V code currently running on the
board. The MAX V code resides in the <install
dir>\kits\arriaVGX_5agxfb3hf35_start\factory_recovery and <install
dir>\kits\arriaVGX_5agxfb3hf35_start\examples\max5 directories. Newer
revisions of this code might be available on the
Arria V GX Starter Kit page of the
Altera website.
■ Power rail —Selects the power rail to measure. After setting the Power rail list to
the desired rail, click Reset to refresh the screen with new board readings.
f
A table with the power rail switch positions/information is available in the
Arria V GX Starter Board Reference Manual .
Figure 6–9. The Power Monitor