Delphi NAV300 - Manual (Page 55)

Delphi NAV300 User’s Guide
- 54 -
Playing an Audio File
Audio functions are controlled by tapping the buttons located on the control bar in
the lower half of the screen:
Play: Tap the Play button to play the file listed. The screen displays the current
playback time and status. If a file is damaged, the next file will be played.
If all of the files are damaged, the receiver displays a popup screen and all audio
playback stops.
Pause: Tap the Pause button to stop playback temporarily. Press the Play
button to continue playback.
Stop: Tap the Stop button to stop playback. The playback indicator will return to
the beginning of the song. Note: If the Previous or Next buttons are selected
while playback is stopped, the previous or next song will be selected.
Repeat: The default repeat mode is “All Repeat.” Tap this button to change
repeat mode from “All Repeat” to “1 Track Play” and then to “All Play.”
Mute: Toggles between “Mute Off” and “Mute On.”
Previous/Next: Tap the Previous and Next buttons to select the previous or
next audio file in the list.
List: Displays the play list screen with the file currently playing highlighted. Use
this screen to scroll through and select audio files. You can also choose to
arrange and play audio in the list in random order or alphabetically.