Delphi NAV300 User Manual
Page 7
Delphi NAV300 User’s Guide
- 6 -
• Always disconnect the receiver from the power supply when leaving the car
parked for a long period or when not using the system during travel. Failure to
do so could drain the vehicle’s battery as the Delphi NAV300 continuously
draws power, even when the power is off.
Warning: Never attempt to disassemble, repair, or make any modification
to the Delphi NAV300. Doing so could result in personal injury, death, and/or
damage to the Delphi NAV300 and/or to your vehicle.
Warning: This device contains a non-replaceable lithium-ion internal
battery that can burst or explode, releasing hazardous chemicals.
To avoid risk of fire or explosion, do not attempt to replace the Delphi NAV300
battery. The Delphi NAV300 battery is not user-replaceable.
To reduce risk of fire or injury, never disassemble, crush, puncture, or dispose of
the Delphi NAV300 in fire or water.
Warning: Never use the power adaptor in a high-moisture environment, or
touch it when your hands or feet are wet. Make sure there is adequate
ventilation around the adaptor when in use, and do not cover it with paper, vinyl,
cloth (including the carrying case) or any other material. The adaptor must be
connected to the correct power source. Do not attempt to service the unit if its
power lead or body becomes damaged or exposed to excess moisture.
Caution: Keep SD cards in a well-protected case to avoid dust and
humidity. Make sure no foreign objects can enter the SD slot.