Altera Cyclone V GT FPGA Development Board - Manual (Page 9)

September 2014 Altera Corporation Cyclone V GT FPGA Development Board
Reference Manual
2. Board Components
This chapter introduces the major components on the Cyclone V GT FPGA
development board.
Figure 2–1 illustrates the component locations and Table 2–1
provides a brief description of all component features of the board.
1
A complete set of schematics, a physical layout database, and fabrication files for the
development board reside in the Cyclone V GT FPGA development kit board design
files directory.
f For information about powering up the board and installing the demonstration
software, refer to the
Cyclone V GT FPGA Development Kit User Guide .
This chapter consists of the following sections:
■ “Board Overview”
■ “Featured Device: Cyclone V GT FPGA” on page 2–5
■ “MAX V CPLD 5M2210 System Controller” on page 2–6
■ “FPGA Configuration” on page 2–11
■ “Clock Circuitry” on page 2–18
■ “General User Input/Output” on page 2–21
■ “Components and Interfaces” on page 2–24
■ “Memory” on page 2–37
■ “Power Supply” on page 2–49