Saab 2006 9-7X User Manual

Page 398

Advertising
background image

(e) Make sure the safety belt reminder light and all your
belts, buckles, latch plates, retractors, and anchorages
are working properly. Look for any other loose or
damaged safety belt system parts. If you see anything
that might keep a safety belt system from doing its job,
have it repaired. Have any torn or frayed safety belts
replaced. Also look for any opened or broken airbag
coverings, and have them repaired or replaced. The
airbag system does not need regular maintenance.

(f) Lubricate all key lock cylinders, hood latch assembly,
secondary latch, pivots, spring anchor, release pawl, rear
compartment hinges, outer liftgate handle pivot points,
rear door detent link, roller mechanism, liftgate handle
pivot points, latch bolt, fuel door hinge, cargo door
hinge, locks, and folding seat hardware. More frequent
lubrication may be required when exposed to a corrosive
environment. Applying silicone grease on weatherstrips
with a clean cloth will make them last longer, seal better
and not stick or squeak.

(g) Inspect hoses for cracks, chafing, leaks, kinks, and
proper installation.

(h) Change automatic transmission fluid and filter if the
vehicle is mainly driven under one or more of these
conditions:

In heavy city traffic where the outside temperature

regularly reaches 90°F (32°C) or higher.

In hilly or mountainous terrain.

When doing frequent trailer towing.

Uses such as found in taxi, police, or delivery

service.

(i) Drain, flush, and refill cooling system. This service can
be complex; you should have your dealer perform this
service. See Engine Coolant
on page 5-24 for what to
use. Inspect hoses. Clean radiator, condenser, pressure
cap, and filler neck. Pressure test the cooling system and
pressure cap.

(j) A fluid loss in any vehicle system could indicate a
problem. Have the system inspected and repaired and
the fluid level checked. Add fluid if needed.

(k) If you drive regularly under dusty conditions, inspect
the filter at each engine oil change.

(l) Visually inspect belt for fraying, excessive cracks, or
obvious damage. Replace belt if necessary.

6-8

Advertising