Checking the fluid level – Oldsmobile 2000 Silhouette User Manual

Page 337

Advertising
background image

6-20

To get the right reading, the fluid should be at normal
operating temperature, which is 180

_F to 200_F

(82

_C to 93_C).

Get the vehicle warmed up by driving about 15 miles
(24 km) when outside temperatures are above 50

_F

(10

_C). If it’s colder than 50_F (10_C), you may

have to drive longer.

Checking the Fluid Level

Prepare your vehicle as follows:
D Park your vehicle on a level place. Keep the

engine running.

D With the parking brake applied, place the shift lever

in PARK (P).

D With your foot on the brake pedal, move the shift

lever through each gear range, pausing for about
three seconds in each range. Then, position the shift
lever in PARK (P).

D Let the engine run at idle for three to five minutes.

Then, without shutting off the engine, follow these steps:

The dipstick is located toward the back of the engine
compartment, next to the brake master cylinder.
The dipstick handle has a bright, red loop design for
easy identification.

1. Pull out the dipstick and wipe it with a clean rag or

paper towel.

2. Push it back in all the way, wait three seconds and

then pull it back out again.

Advertising