Hyundai H-CMMD4043 - Manual (Page 42)

42
Scan tuning
1. You can scan each stored channel for 10 seconds in sequence. Press the AS/PS button on the panel to start
scanning. OR Press ENTER button on the panel.
2 Press any keys that refer to TV functions to stop auto searching..
Select the TV station
Press the number buttons on the RC to recall the desired TV station.
Display TV station
To display current TV station number press the DISP button on the panel.
AUX IN mode
This mode is for using the unit as an AV signal amplifier or connecting the rear-view camera.
Connect the peripheral device (DVD player, video-camera, rear-view camera etc) to the unit via RCA output and
AUX in. The unit will be switched into the AUX mode and will show the picture from the device connected.
You can use the VOL knob, functional buttons, set the video and audio parameters from the unit.
To enter the AUX in mode press the SRC button repeatedly.
OR in the main menu select the AUX IN item.