Oldsmobile 1999 Aurora - Manual (Page 11)

yellow blue
1-5
If you prefer to program the transmitter to the exit seat
position, which moves the seat completely down and
back, follow these steps:
1. Press the SET button on the driver’s door panel.
You will hear one beep.
2. Press one of the memory buttons on the driver’s door
panel. You will hear one beep, but the seat will not
move at this time.
3. Press the UNLOCK button on the appropriate
transmitter within five seconds. You will hear
two beeps.
This personalization feature will work only when the
vehicle is in PARK (P). A beep will sound inside the
vehicle when the UNLOCK button on the transmitter is
pressed to move the seat and mirrors.
To turn this feature off, press SET and then UNLOCK
within five seconds.
Heated Front Seat (Option)
This feature will quickly heat the lower cushions and
lower back of the driver and front passenger seats for
added comfort.
Press the button once to turn the heater on high. The HI
indicator light below the button will glow. Press it again
to turn the heater on low. The LO indicator light below
the button will glow. Press it a third time to turn the
heater off. The heater will turn off automatically when
the ignition is turned to OFF.