Dolby Laboratories TFDVD 3295 - Manual (Page 14)

9
HDMI 1/2/3 Input
Component 1/2 Input (Y Cb/Pb Cr/Pr)
Cable Connections
AC 100V-240V
50Hz/60Hz
External AV Source
Component 1 Connection
The component port is capable of
accepting high-definition signals from
standard video sources. (e.g., cable/
satellite boxes, DVD players, VCRs,
etc.)
Connect the Y, Cb/Pb(1/2), Cr/ 1.
Pr(1/2) port by the component
cable to input the video signal.
Component cabel is not included
with this product.
Use the red/white plug of supplied 2.
AV cable to connect R,L (1/2) port
for audio transmission.
Note: The component video jacks on
your A/V device are sometimes labeled
YPbPr, or YCbCr. For an explanation of
component video, see your A/V device’s
user guide.
HDMI (High Definition Multimedia
Interface) is a new type of connection
that transmits digital audio and video
signals simultaneously over a single
cable. A HDMI cable is required for
the HDMI connection.
These HDMI input connectors
are capable of receiving video at
resolutions up to 1080p (1080-
progressive).
External AV Source
External AV Source
Unit Rear Panel HDMI1,2 Connection
Unit Side Panel HDMI3 Connection
AC 100V-240V
50Hz/60Hz
AC 100V-240V
50Hz/60Hz
External AV Source
Component 2 Connection