Dolby Laboratories TFDVD 3295 - Manual (Page 26)

21
Various features can be preset through the DVD setup menu. Press the DVD SETUP button to show the
DVD menu.
While working with the setup menu:
Press the direction buttons to select the desired item. 1.
Press the right direction button or the OK button to confirm settings. 2.
To exit, press DVD SETUP again. 3.
System Setup
TV System 1. - Select the TV System from NTSC/PAL/AUTO. The default setting is NTSC. (The TV System
for north America is NTSC. AUTO should only be used if you have a Multi-System TV).
Power Resume
2. - Set the power resume function On.Off. The default setting is Off.
Screen Saver - 3. Set the Screen Saver ON/OFF. The default setting is On. The screen saver is useful to
prevent your display from becoming damaged. If the Screen Saver is set ON, the screen saver picture
appears when you leave the player in the stop mode for about a few minutes. Press any button on the
unit/remote to exit the screen saver.
Password -
4. Move the cursor to the PASSWORD prompt and press OK. Input the password 8888, if it is
the first use. After confirmation, you will be required to input a new 4-digit code, and verify again.
Rating -
5. There are eight levels of Parental Control. Level one opens discs to people of all ages, level
eight is suitable only for adults. To change the parental control setting, a 4-digit code is required to be
input first. (The default code is 8888). When the input code is confirmed, the level setting menu will
appear, select the appropriate level by the UP/DOWN button and press OK to confirm.
Default -
6. This function allows you to set the unit back to the factory default.
DVD Setup