American Weigh Scales (AWS) CG-500 - Manual (Page 3)

I. OPERATION
Place Scale on a horizontal flat surface.
1. Press [ ON/OFF ] key to turn the scale on.
2. Wait until "0.0” or "0.00" is displayed.
3. Place the object(s) onto the weighing platform.
4. By pressing the [ MODE ] key, you can switch
between weighing units..
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place a tray or container on the scale platform.
3. Press [ TARE ] and wait until "0.0" or "0.00" is
displayed.
4. You can now add items to the container or tray to
obtain just the weight of the contents.
III. COUNTING FEATURE
1. Turn on the scale and wait until the LCD displays
"0.0" or "0.00".
2. Place a sample quantity (25pcs, 50pcs, 75pcs,
or 100pcs) of the items you want to count onto the
platform.
3. Press and HOLD the [ PCS ] key for 2 seconds;
the LCD will display the sample quantity setting, for
example “100”.
4. Press the [ MODE ] key to select the sample
amount of the item which you placed onto the platform.
5. Press the [ PCS ] key to confirm the above
information, the LCD will now display “pcs” in the
corner to show that the scale is in counting mode.