Connecting to a host using ethernet, Addresses, subnets, and ports, 14 swm24 hardware manual – Applied Motion SWM24IP-3EE User Manual
Page 14
Connecting to a Host Using Ethernet
This process requires three steps
•
Physically connect the drive to your network (or directly to the PC)
•
Set the drive’s IP address
•
Set the appropriate networking properties on your PC.
Note: the following pages are an excerpt from the “eSCL Communication Reference Guide”. For more
information, please read the rest of the guide.
Addresses, Subnets, and Ports
Every device on an Ethernet network must have a unique IP address. In order for two devices to communicate
with each other, they must both be connected to the network and they must have IP addresses that are on the
same subnet. A subnet is a logical division of a larger network. Members of one subnet are generally not able
to communicate with members of another unless they are connected through special network equipment (e.g.
router). Subnets are defined by the choices of IP addresses and subnet masks.
If you want to know the IP address and subnet mask of your PC, select Start…All Programs…Accessories…Com-
mand Prompt. Then type “ipconfig” and press Enter. You should see something like this:
If your PC’s subnet mask is set to 255.255.255.0, a common setting known as a Class C subnet mask, then your
machine can only talk to another network device whose IP address matches yours in the first three octets. (The
numbers between the dots in an IP address are called octets.) For example, if your PC is on a Class C subnet
and has an IP address of 192.168.0.20, it can talk to a device at 192.168.0.40, but not one at 192.168.1.40. If
you change your subnet mask to 255.255.0.0 (Class B) you can talk to any device whose first two octets match
yours. Be sure to ask your system administrator before doing this. Your network may be segmented for a rea-
son.
Your drive’s IP Address is stored internally in nonvolatile memory. The factory default address is 10.10.10.10.
This address can be changed using our ST Configurator software. See Edit IP Address Table under the Drive
menu.
14
SWM24 Hardware Manual
920-0068B
10/31/2013