Atlona ATPROHD48M SR - Manual (Page 5)

www.atlona.com | toll free: 1-877-536-3976
For International: 1- 408-962-0515
5
2. Rear Panel
1. Outputs 1- 4 via HDMI and RJ45
2. HDMI Inputs 1 - 4
3. Outputs 5 - 8 via HDMI and RJ45
4. 12v DC input
5. RS485 port – comes with RS485 to RS232 adapter
6. TCP/IP port
7. IR extension for controlling the switcher from further away
8. IR port for controlling devices located near the switch
9. DIP Switch configuration
Note: The TCP/IP port has to be connected to the computer via direct Crosswire CAT5/6/7 wire while if connected to the
router it needs to be connected though Straight wire.
Out put 1 Output 2 Out put 3 Output 4 Output 5 Output 6 Output 7 Output 8
Cat5e- 1
Cat5e- 2 Cat5e- 1
Cat5e- 2 Cat5e- 1
Cat5e- 2 Cat5e- 1
Cat5e- 2 Cat5e- 1
Cat5e- 2 Cat5e-1
Cat5e-2 Cat5e- 1
Cat5e- 2 Cat5e- 1
Cat5e- 2
UTP HDMI UTP HDMI UTP HDMI UTP HDMI UTP HDMI UTP HDMI UTP HDMI UTP HDMI
DC/12V RS485 LAN
IR Ext.
IR Emitter
Source 1 Source 2 Source 3 Source 4
Input 1I nput 2 Input 3 Inpu t 4
1 2 3
4 5 6 7 8 9
HDMI Receiver (8 x Receivers included)
RJ45 inputs – please be careful when connecting RJ45 # 1 and # 2 inputs. They absolutely have to match the
outputs on the switch. Output # 1 should be connected to Input # 1 and Output # 2 should be connected to
Inputs # 2.
RJ45 Inputs IR Input RX
Power Input
HDMI Out