Atlona AT HDSDI AV - Manual (Page 5)

3
PANEL DESCRIPTION
1. Front Panel
1. HD/SD-SDI INPUT: connect to your SDI source device
2. HD/SD LED: green light for HD-SDI signal; orange light for SD-SDI signal, no light for no signal
3. HD/SD OUTPUT 1: first equalized HD/SD-SDI signal loop out
4. POWER LED: red light for power on; no light for power off
5. HD/SD OUTPUT 1: second equalized HD/SD-SDI signal loop out
6. +5V DC: Connect to a 5V DC power supply unit.
2. Rear Panel
7. DVI / HDMI OUTPUT: plug in the HDMI-DVI adapter for DVI output
8. Component Output: plug in the VGA-component breakout cable for component output
1 2 3 4
7 8
5 6
7