Atlona AT HDMI V42 - Manual (Page 3)

2 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
The is a high performance HDMI™ v1.3 Switcher with remote control. It allows your various HDMI™ source to share two
HDTV display. Simply pressing one button to select your desired HDMI™ source for display on the HDTV.
Each product in this series is compatible to HDMI™ v1.3 specifications, a cutting-age technology which defines the sup-
port to transfer Deep Color (10-bit and 12-bit) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) digital audio, with a high bandwidth up to 225MHz.
• HDMI™ 1.3, HDCP1.1 and DVI1.0 compliant Receiver.
• Deep color video up to 12bit, 1080p@60Hz.
• Four HDMI™ sources to connect up to two HDMI™ displays simultaneously.
• Supports DVI source and DVI display by using HDMI™ to/from DVI adaptor cable.
• Dolby Digital, DTS digital audio transmission (32-192kHz Fs sample rate).
• Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480i to 1080p.
• HDMI™ cable distance test with 1080p resolution: Input/Output source can run up to 30M/5.1CH.
• Full HDCP Compliant.
3.1. Front Panel
1. Remote Control Sensor.
2. HDMI™ input Select/Indicator: Press the “Input” button sequentially to switch to your desired input ( HDMI™ 1 to
HDMI™ 4 ), the LED will illuminate to indicate which input source is selected
3. POWER Switch/Indicator: Press the “POWER” button to turn on/off the power, the power LED illuminate in red
color means the power is turned on, when the LED not illuminate power is turned off.
INTRODUCTION
FEATURES
OPERATION CONTROLS AND FUNCTIONS
1 2 3