Atlona AT HDMI V42 - Manual (Page 4)

3 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
1. Power: Press the button to turn on/off the unit.
2. Direct input selector:
Press 1, 2, 3 or 4 to select the desired input source.
The connection between splitter and remote controller with RS-232 modem cable.
ns definition of modem cable
Splitter Remote Controller
PIN Definition PIN Definition
1 NC 1 NC
2 TxD 2 RxD
3 RxD 3 TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
REMOTE CONTROL
RS-232 REMOTE CONTROL PROTOCOL
3.2. Rear Panel
1. HDMI™ Outputs 1 and 2: Connect each of the output ports to the HDMI™ display. When more than
one output connected, the HDMI™ outputs play identical video signal simultaneously.
2. RS232: 9-pin D-Sub connector for connecting to your PC or other control console for remote control.
3. HDMI Inputs 1 to 4: Connect each of the input ports to the HDMI or DVI output of your source equip-
ment such as DVD player or set-top-box.
4. Power: Plug the 5V DC power supply into this unit and connect the adaptor to AC wall outlet.
1 2 3 4