Atlona AT H2H 44M - Manual (Page 4)

4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Panel Description
Front Panel
1. IR Receiver Window. Receives the signal from the included IR Remote Control or a 3rd party IR
Controller.
2. Power Button. On (blue backlight) or Standby (red backlight) mode.
3. Function Button. Allows you to select command options. (blue backlight when selected)
a.
Default: Mirrors all inputs to corresponding outputs. (i.e. 1 to 1, 2 to 2, 3 to 3, etc.)
b. All: Save a single input to all the outputs with this function.
c. Memory: Save/load the current input and output route to memory.
d. EDID: Save/Load EDIDs to individual inputs.
Note: Default setting for EDID is the highest common HD resolution of all connected
devices. (i.e. if you have resolutions ranging 720p 2Ch audio, 1080i 2Ch audio, and
1080p multichannel audio then 720p 2Ch audio would be the default resolution for all
connected displays.)
4. Enter Button. Use to view current status for inputs and outputs or to confirm a command.
5. Cancel Button. Use to go back one screen or press multiple times to return to the home screen.
Note: You cannot power off or change functions unless you go to the home screen.
6. Number buttons. Use these buttons to select input and output paths or use with the function
button to change multiple matrix settings.
1 3 4 a b c d 2 5
6