Atlona AT DVIF30SR - Manual (Page 3)

INTRODUCTION
1
Atlona Technologies’ new AT-DVIF30S (Transmitter) and AT-DVIF30R (Receiver) unit is a low cost, Fiber
Optic HDMI Extension kit. This extremely small and high performance unit will carry a single DVI video
signal, bi-directional stereo audio and 2 channels of RS-232 through one multimode fiber. This UL/CE
approved Mini-HDMI fiber optic transmitter allows any HD display to extend that displays resolution up to
400m (1320FT) at WUXGA (1920x1200 @ 60Hz) and supports HDTV resolution up 1080p.
Along with being HDCP compatible, Atlona’s AT-DVIF30SR is equipped with advanced digital fiber optic
technology, which allows for self adjustment with no compression, bit reduction, or signal degradation.
Multiple signals can also be run in a single conduit without crosstalk. These units support 12-bit color
depth and have an 8dB input equalizer, which compensates losses over 5m (16ft.). ESD Protection on all
I/O interfaces has been added to ensure quality assurance. With this embed¬ded self-adjustment and no
power cord needed, quick and easy set up is as simple as plug and play.
The AT-DVIF30S is compatible with other Atlona product AT-HDF30R ( HDMI receiver ) and AT-RGBF30R
(for non HDCP signal only), this makes both fiber transmission and DVI-to-HDMI/RGB/YPbPr conversion
in one single setup. This extension kit is a perfect solution for Video Wall Presentations and all Digital
Signage applications.
• DVI 1.0 Compliant
• Supported signals:
Digital Video ( DVI )
Bi-Directional Stereo Audio
2 Channel RS232
• Supported resolutions at 400M ( 1320FT )
PC : 1920x1200 (60Hz)
HDTV: 1080p/1080i/720p
• Supports HDCP/DDC Content
• No loses, no degradations, no crosstalk
• One Multimode ( SC type ) Fiber
• UL/CE/FCC apporved product
• 12-bit color depth and 8dB equalizer
• MAC/PC compatible
• High secure signal transfer
• Compatible with AT-HDF30R and AT-RGBF30R
FEATURES: