Atlona AT DVIF20SR - Manual (Page 3)

INTRODUCTION
1
Atlona Technologies’ new Mini DVI, model AT-DVIF20SR, (Sender and Receiver) is a low cost
Fiber Optic HDMI extender. These extremely small form factor, UL/CE approved units will carry
DVI video signal and HDCP/DDC information through a single multimode fiber allowing any
HD source to extend signal up to 400m (1320FT) at WUXGA (1920x120 @ 60Hz) or HDTV
resolutions 1080p/1080i/720p. These balun units are equipped with advanced digital fiber optic
technology allowing for self adjustment with no compression, bit reduction, or signal degrada-
tion. Multiple signals can be run in a single conduit without crosstalk. These units support 12-bit
color depth and have an 8dB input equalizer, which compensates losses over 5m (16ft.). ESD
Protection on all I/O interfaces has been added to ensure quality assurance. With no power
cord needed, quick and easy set up is as simple as plug and play.
• DVI 1.0 Compliant
• Supported resolutions at 400M ( 1320FT )
PC : 1920x1200 (60Hz)
HDTV: 1080p/1080i/720p
• Supports HDCP/DDC Content
• No loses, no degradations, no crosstalk
• One Multimode ( SC type ) Fiber
• 12-bit color depth and 8dB equalizer
• MAC/PC compatible
• High secure signal transfer
• AT-DVIF20S x 1
• AT-DVIF20R x 1
• Operation Manual x 1
FEATURES:
PACKAGE CONTENTS: