Atlona AT DVID30SR - Manual (Page 4)

3 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Frequency Bandwidth 2.25 Gbps
Transmitter Input Port 1 x Dual link DVI-D
Output Port 3 x CAT5/6/7 (2 x Video, 1 x DDC)
Receiver Input Port 3 x CAT5/6/7 (2 x Video, 1 x DDC)
Output Port 1 x Dual link DVI-D
CAT6 Cable 1080p 8-bit 30(M), 12-bit 25(M)
ESD Protection Human body model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (in.) 3.09”(W) x 4.13”(D) x 1.18”(H)
Power Supply 1 x 5V DC / 2.6A
Weight (lb) 0.8 each box
Chassis Material Aluminum
Silkscreen Color Black
Power Consumption 10W
Operating Temperature 0 o C ~ 40 o C / 32 o F ~ 104 o F
Storage Temperature -20 o C ~ 60 o C / -4 o F ~ 140 o F
Relative Humidity 20~90% RH (non-condensing)
SPECIFICATIONS
PANEL DESCRIPTIONS
The following sections describe the hardware components of the unit.
1. Front Panel
1. DUAL LINK DVI IN: This slot is where you connect to the DVI or HDMI output port of your source equipment such as
a PC with DVI or HDMI to a DVI cable.
2. DC 5V Power: This slot is where you plug the 5V DC power supply into the unit and connect the adaptor to an AC
wall outlet.
3. POWER LED: This LED will illuminate when the device is connected with power.
4. LINK LED: When the device detects both the source and display signal the SYNC LED will illuminate.
5. DUAL LINK DVI OUT: This slot is where you connect to the DVI or HDMI monitor with a DVI or DVI to HDMI cable.