Atlona AT DVID30SR User Manual
Page 5
4
www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2. Rear Panel
1. POWER/DDC: Connect the DDC output of the transmitter to the DDC input of the receiver unit using CAT5/6/7 cables.
2. VIDEO 2: Connect the VIDEO 2 output of the transmitter to the VIDEO 2 input of the receiver unit using CAT5/6/7
cables.
3. VIDEO 1: Connect the VIDEO 1 output of the transmitter to the VIDEO 1 input of the receiver unit using CAT5/6/7
cables.
1. Dual Link DVI-D Pin Definition
DVI-D Receptacle Connector
Digital-Only Connector Pin Assignments
Pin
Signal Assignment
Pin
Signal Assignment
Pin
Signal Assignment
1
T.M.D.S Data2-
9
T.M.D.S Data1-
17
T.M.D.S Data0-
2
T.M.D.S Data2+
10
T.M.D.S Data1+
18
T.M.D.S Data0+
3
T.M.D.S. Data2/4 Shield
11
T.M.D.S. Data1/3 Shield
19
T.M.D.S. Data0/5 Shield
4
TMDS Data 4-
12
TMDS Data 3-
20
TMDS Data 5-
5
TMDS Data 4+
13
TMDS Data 3+
21
TMDS Data 5+
6
DDC Clock
14
+5V Power
22
T.M.D.S. Clock Shield
7
DDC Data
15
Ground (for +5)
23
T.M.D.S. Clock+
8
No Connect
16
Hot Plug Detect
24
T.M.D.S. Clock-
PIN ASSIGNMENT