Atlona AT DVI40SRS - Manual (Page 3)

2 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
The AT-DVI40SRS 1080p DVI Extender over Single CAT5 extends your PC DVI transmission distance up to 60m
(200ft) at 1024x768@60Hz. With AT-DVI40SRS, users can transmit high quality digital video of PC applications
through one cost effective Cat5/5e/6 cables to the remote monitor or projector, instead of using short and
expensive DVI cables. With embedded EDID inside the extender, your PC will continue to send the digital video
even when the monitor is not connected. The user can then disconnects the monitor, place it in a remote loca-
tion and reconnect it without rebooting the operating system.
The AT-DVI40SRS includes two units: transmitting and receiving units. The transmitting unit is connected to
your PC DVI output and the receiving unit is connected to the monitor. While successfully connected, the two
LED lights on the RJ-45 connector will blink. The transmission distance between the sending and receiving
units can be up to 60m (200ft) at XGA (1024x768@60Hz) and 30m (100ft) at UXGA (1600x1200@60Hz),
1920x1200 (50ft) With compact size, AT-DVI40SRS is the most cost effective choice for bringing your impres-
sive digital video to the remote display.
• DVI 1.1 compliant
• Handy DVI-D to RJ-45 adapter
• Extends the transmission distance from the sources up to 60m/200ft at XGA (1024x768@60Hz) and
30m/100ft at UXGA (1600x1200@60Hz) and 1920x1200 (50ft)
• Minimize the cable skew by adjustable 8-level equalization rotary control
• Supports 1080i/1080p HDTV resolutions & VESA standards
• Receiving unit can learn EDID information for DVI/HDMI supported display device
Note: The length depends on the characteristics and quality of the cables. Higher resolutions and longer transmission
distances require low skew cables (<25ns/100m) for best performance.
Unshielded CAT6 with metal RJ-45 connectors is recommended.
INTRODUCTION
FEATURES
• 1 x AT-DVI40SRS
• 1 x 5V power supply unit
• 1 x User’s Manual
PACKAGE CONTENT